Alumahangers Instagram

alumawoodhanger.com

Coring concrete

When building an Alumawood patio cover on an existing slab. One way to solve the problem is coring concrete for the footing. Then you can dig the dirt out and set you steel posts in concrete to stabilize the header beams. Here are a few pictures to get the point across.

Top of Alumawood

IRP(insluated roof panel ) Above and Newport 6" Flat Panel Below

This is the top of an Alumawood patio cover. There are two kinds of Alumawood Roofs: IRP (Insulated Roof Panels) and Newport Flat Panel (or 6"flat panel). In this picture you see the Newport

Flat Panel. The Newport is considerable more affordable and cannot be walked on.

The IRP can be walked on but not for a balcony. It can support the weight of someone if they need to get on top. Both products  

As a builder my option for each:

Flat Panel Newport: If you are just looking for shade then the Newport patio is the cost effective way of getting that done. Saving money is a huge benefit in my mind. The bottom of the patio is flat and has wood texture. You can still get all the electrical extras, columns, lighting, blind, etc.. You can not walk on the top. You would need ply wood along the wall to get on top of the cover to distribute the weight

Insulated Roof Panel: Insulated roof panels are considered an upgrade. You can walk on the top when you need. Another reason to use the IRP would be if you intend on creating a room in closer down the road. Also, some HOA's only allow the IRP because they don't like the non-insulated roof "look" from the top.

Custom Turns

Here is a patio cover that had a very unique turn. The slope off the roof and headers had to be calculated exactly in order for the panels to flow smoothly accross the roof line. It seemed difficult before the build but like most things as long as you focus and pay attention anything is possible. Hope you like this one. Just want everyone to know what is possible with Alumawood.

Alumawood small parts

http://alumawoodproducts.com/products/

Rebuild of Snow damaged patios

Here is a before and after of a lattice patio that came down in the snow. The first patio that came down was described in the last post.

The new patio was build with a wood ledger wrapped in Alumawood, 2 posts were added and the material was all upgraded to meet engineering standards. Enjoy

Fly by night operation

Here is an example of why people need to do there home work when choosing a contractor. There was a freak snow storm in Murrieta on New Year's Eve. Most places got less the 3" of snow, but some got up to 6". The phone started ringing of patios coming down. This patio was only held up by 4 brackets. This was so poorly built that it just feel to the ground. Thank goodness that nobody was hurt. Just remember to check references, and how long the company has been in business. 

You can never be too safe. Good luck with you next patio.